• Swing Over Bed – 20”
• Swing Over Cross Slide – 10-5/8”
• Swing in Removeable Gap – 27-1/2”
• Distance Between Centers – 80”
• Spindle Speeds (14) – 22 to 2000 RPM
• Spindle Nose – D1-6 Camlock
• Hole Thru Spindle – 2”
• Thread Range – Inch (35) – 1 to 80 TPI
  Metric (29) – 0.5 to 40 mm
• Feed Range – Carriage (38) – .002 to .242”/Rev.
  Cross Slide (38) – .001 to .121”/Rev.
• Power Rapid Traverse – Longitudinal – 120”/Min.
  Cross – 60”/Min.
• Tailstock Spindle Taper – #5 MT

Equipment

• 12” 3-Jaw Universal Chuck
• 15” 4-Jaw Independent Chuck
• (2) Steady Rests
• Taper Attachment
• Quick Change Toolpost with (7) Holders
• Live Center
• Jacobs Key Chuck with Adaptor
• Coolant System
• Motor and Controls – 7-1/2 HP 3/60/220-440 Volt

Stock #7687P
Serial #450200901352